×

Search Site...

PROFESSIONAL ACCREDITATIONS & AFFILIATIONS


Accreditations

Resource

AASHTO re:source (formerly AMRL)

http://aashtoresource.org/

  • Quality Management System
  • Asphalt Binder
  • Asphalt Mixture
  • Soil
  • Aggregate

Ccrl

CCRL Cement and Concrete Reference Laboratory

http://www.ccrl.us/


Astm Logo

ASTM International

https://www.astm.org

Certifications

Aci

American Concrete Institute (ACI)

https://www.concrete.org/

  • ACI Concrete Field Testing Technician – Grade I
  • ACI Concrete Strength Testing Technician
  • ACI Concrete Laboratory Testing Technician – Level 1
  • ACI Aggregate Testing Technician – Level 1
  • ACI Aggregate Testing Technician – Level 2


Agency Transportation Cabinet

Kentucky Transportation Cabinet (KYTC)

http://transportation.ky.gov/Pages/

  • KYTC Aggregate
  • KYTC Superpave Plant Technologist (SPT)
  • KYTC Superpave Mix Design Technologist (SMDT)
  • KYTC Asphalt Paving Best Practices
  • KYTC Grade and Drain Level I


Indot

Indiana Department of Transportation (INDOT)

http://www.in.gov/indot/

  • INDOT Certified Aggregate Technician
  • INDOT Certified HMA Technician


Idot

Illinois Department of Transportation (IDOT)

http://www.idot.illinois.gov/

  • IDOT CET 020 Mixture Aggregate Technician
  • IDOT CET 029 Hot Mix Asphalt Level I
  • IDOT CET 023 Hot Mix Asphalt Level II
  • IDOT CET 031 Hot Mix Asphalt Level III



Ksdot

Kansas Department of Transportation (KSDOT)

http://www.ksdot.org/

  • *Reciprocal Certifications with MoDOT


Modot

Missouri Department of Transportation (MoDOT)

http://www.modot.org/

  • MoDOT Aggregate Technician
  • MoDOT Bituminous Technician
  • MoDOT Concrete Strength
  • MoDOT Plasticity Index
  • MoDOT Superpave QC/QA
  • MoDOT HMA Aggregates (Consensus Tests)
  • MoDOT TSR


Odot

Oklahoma Department of Transportation (ODOT)

https://ok.gov/odot/

  • ODOT Aggregates
  • ODOT Asphalt Materials
  • ODOT Asphalt Mix Design Level I
  • ODOT Asphalt Mix Design Level II


Ahtd

Arkansas State Highway and Transportation Department (AHTD)

http://www.arkansashighways.com/

  • AHTD Basic Aggregates Testing Technician
  • AHTD Hot Mix Asphalt Testing Technician


Penndot

Pennsylvania Department of Transportation (PennDOT)

http://www.penndot.gov/

  • PennDOT Aggregate Technician
  • PennDOT Bituminous Plant Level 1 Technician
  • PennDOT Bituminous Plant Level 2 Technician


Affiliations

Test Methods

Quality Management System

 

R 18-16  Establishing and Implementing a Quality Management System for Construction Materials Testing Laboratories

D3666 - 16  Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials

 

Asphalt Mixture

 

R30  Standard Practice for Mixture Conditioning of Hot Mix Asphalt (HMA)

R35  Standard Practice for Superpave Volumetric Design for Asphalt Mixtures

R47  Standard Practice for Reducing Samples of Hot Mix Asphalt (HMA) to Testing Size

R68  Standard Practice for Preparation of Asphalt Mixtures by Means of the Marshall Apparatus

T30  Standard Method of Test for Mechanical Analysis of Extracted Aggregate

T164  Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot Mix Asphalt (HMA)

T166  Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens

T168  Standard Method of Test for Sampling Bituminous Paving Mixtures

T209  Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Hot Mix Asphalt (HMA)

T245  Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus

T269  Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures

T283  Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage

T305  Standard Method of Test for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures

T308  Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method

T312  Standard Method of Test for Preparing and Determining the Density of Asphalt Mixture Specimens by Means of the Superpave Gyratory Compactor

T324  Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt (HMA)

T329  Standard Method of Test for Moisture Content of Asphalt Mixtures by Oven Method

T331  Standard Method of Test for Bulk Specific Gravity (Gmb) and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method

D979/D979M – 15  Standard Practice for Sampling Bituminous Paving Mixtures

D2041/D2041M - 11   Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures

D2172/D2172M – 11  Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures

D2726/D2726M - 14  Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures

D3203/D3203M – 11  Standard Test Method for Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures

D4867/D4867M - 09(2014)  Standard Test Method for Effect of Moisture on Asphalt Concrete Paving Mixtures

D5404/D5404M - 12  Standard Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator

D5444 - 15  Standard Test Method for Mechanical Size Analysis of Extracted Aggregate

D6307 - 16  Standard Test Method for Asphalt Content of Asphalt Mixture by Ignition Method

D6390 - 11  Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures

D6752/D6752M - 11 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method

D6925 - 15 &n  bsp; Standard Test Method for Preparation and Determination of the Relative Density of Asphalt Mix Specimens by Means of the Superpave Gyratory Compactor

D6926 - 10  Standard Practice for Preparation of Bituminous Specimens Using Marshall Apparatus

D6927 - 15  Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures

D6931 - 12  Standard Test Method for Indirect Tensile (IDT) Strength of Bituminous Mixtures

 

Asphalt Binder

 

R 28-12 (2016)  Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)

R 29-15  Grading or Verifying the Performance Grade (PG) of an Asphalt Binder

T 48-06 (2015)   Flash and Fire Points by Cleveland Open Cup

T 51-09 (2013)  Ductility of Asphalt Materials

T 202-15  Viscosity of Asphalts by Vacuum Capillary Viscometer

T 228-09 (2013)  Specific Gravity of Semi-Solid Asphalt Materials

T 240-13  Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test)

T 301-13  Elastic Recovery Test of Asphalt Materials by Means of a Ductilometer

T 313-12 (2016)  Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)

T 315-12& (2016)  Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)

T 316-13  Viscosity Determination of Asphalt Binder Using Rotational Viscometer

T 350-14  Multiple Stress Creep Recovery (MSCR) Test of Ashpalt Binder Using a Dynamic Shear Rheometer (DSR)

D70 - 09e1  Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method)

D113-07  Standard Test Method for Ductility of Bituminous Materials

D2171/D2171M - 10  Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer

D7643 - 10  Standard Practice for Determining the Continuous Grading Temperatures and Continuous Grades for PG Graded Asphalt Binders

 

Soil

 

T 89-13   Determining the Liquid Limit of Soils

T 90-16  Determining the Plastic Limit and Plasticity Index of Soils

T 99-15  Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop

T 100-15  Specific Gravity of Soils

T 176-08 (2013)  Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test

T 180-15  Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop

D698 - 12e2  Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))

D1557 - 12e1  Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))

D2419 - 14  Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate

D4318 - 10e1  Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils

 

Aggregate

 

R 76-16  Reducing Samples of Aggregate to Testing Size

T 2-91 (2015)  Sampling of Aggregates

T 11-05 (2013)  Materials Finer Than 75-µm (No. 200) Sieve in Mineral Aggregates by Washing

T 19M/T 19-14  Bulk Density (“Unit Weight”) and Voids in Aggregate

T 21M/T 21-15  Organic Impurities in Fine Aggregates for Concrete

T 27-14  Sieve Analysis of Fine and Coarse Aggregates

T 37-07 (2016)  Sieve Analysis of Mineral Filler for Hot Mix Asphalt (HMA)

T 84-13  Specific Gravity and Absorption of Fine Aggregate

T 85-14  Specific Gravity and Absorption of Coarse Aggregate

T 96-02 (2015)  Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine

T 104-99 (2016)  Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate

T 112-00 (2012)  Clay Lumps and Friable Particles in Aggregate

T 113-15  Lightweight Pieces in Aggregate

T 176-08 (2013)  Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test

T 255-00 (2012)  Total Evaporable Moisture Content of Aggregate by Drying

T 304-11 (2015)  Uncompacted Void Content of Fine Aggregate

T 327-12 (2016)  Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus

T 335-09 (2013)  Determining the Percentage of Fracture in Coarse Aggregate

C29/C29M - 16  Standard Test Method for Bulk Density (“Unit Weight”) and Voids in Aggregate

C40/C40M - 11  Standard Test Method for Organic Impurities in Fine Aggregates for Concrete

C88 - 13  Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate

C117 - 13  Standard Test Method for Materials Finer than 75-?m (No. 200) Sieve in Mineral Aggregates by Washing

C123/C123M - 14  Standard Test Method for Lightweight Particles in Aggregate

C127 - 15  Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate

C128 - 15  Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate

C131/C131M - 14  Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine

C136/C136M - 14  Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates

C142/C142M - 10  Standard Test Method for Clay Lumps and Friable Particles in Aggregates

C535 - 16  Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine

C566 - 13  Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying

C702/C702M - 11  Standard Practice for Reducing Samples of Aggregate to Testing Size

C1252-06  Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)

D75/D75M - 14  Standard Practice for Sampling Aggregates

D546 - 10  Standard Test Method for Sieve Analysis of Mineral Filler for Bituminous Paving Mixtures

D2419 - 14  Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate

D4791 - 10  Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate

D5821 - 13  Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate

D6928 - 10  Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus